Class | Description |
---|---|
AdditionalSectorization |
Represents additional sectors for port communications (as contained is the communication Primary Extension Continuation Records).
|
AircraftUsageGroup |
The Aircraft Use Group field provides information on what aircraft or groups of aircraft are permitted to use a certain route.
|
AirportHeliportCommunicationServiceIndicator |
The “Service Indicator” field is used to further define the use of the frequency for the specified Communication Type.
|
AirspaceRouteHoldAltitude |
This element is the parent of altitudes on holds, airspaces, and routes.
|
AirspaceRouteHoldAltitudeConstraint |
This element represents the upper and lower altitude restrictions for a preferred route, airway, holding pattern, etc.
|
AirspaceSpeedRestriction |
When government source provides a speed restriction then this element will be provided
|
AirwayWaypointDescription |
This class represents the waypoint description information used by airway legs.
|
Alpha |
This Class represents the "Alpha" character type of the Arinc 424 data.
|
AlternateDetails |
This class is an abstraction used to represent the details of an Alternate.
|
AltitudeConstraint |
The altitude constraint provides an at, at or above, at or below, or between altitude for a parent object.
|
AltitudeLimitation |
The “Altitude Limitation” is used on navaid limitation continuation records.
|
ApproachWaypointDescription |
This class represents the additional waypoint description information used by approach procedure legs.
|
Bearing |
Java class for Bearing complex type.
|
CommonSegmentDetails |
This type represents the details for a Common Segment.
|
ConditionalAltitudeTermination |
This element contains conditional termination information
|
Constraint |
This element provides the altitude information in its children.
|
Course |
Java class for Course complex type.
|
CruiseLevelOrSeparation |
Used to represent levels and separations in cruising tables.
|
EnrouteCommunicationServiceIndicator |
The Service Indicator field is used to further define the use of the frequency for the specified Communication Type (5.101).
|
FlightPlanAltitude |
This element provides the altitudes for a flight plan.
|
FraInfo |
This element provides boolean information about free route airspace
|
Frequency |
This field specifies frequency and unit of measure of the frequency information.
|
GeographicalReferenceTableIdentifier |
The “Geographical Reference Table Identifier” will be used to provide a unique identification for each Geographical Entity.
|
HelipadDimensions |
Defines the dimensions of the helicopter landing pad.
|
HighPrecisionLocation |
High Precision Location
|
HoldingUses |
This data type provides boolean flags indicating how the holding pattern is used
|
IntermediateFixDetails |
This type represents the details of an intermediate Fix
|
Latitude |
The “Latitude” field contains the latitude of the navigational feature identified in the record.
|
LegTypeCode |
The “Leg Type Code” field used on Flight Planning Arrival/Departure Data Records is a simplification of the Path Terminator concept.
|
Location |
Latitude and Longitude details of this point.
|
Longitude |
The Longitude field contains the longitude of the geographic position of the navigational feature identified in the record.
|
LowerAltitudeConstraint |
This element provides information on the lower altitude of the airway leg.
|
MagneticVariation |
The “Magnetic Variation” field specifies the angular difference between True North and Magnetic North at the location defined in the record.
|
MinimumAltitude |
The Decision Altitude (DA) or Minimum Descent Altitude (MDA) associated with this landing minimum.
|
MinimumHeight |
The Decision Height (DH) or Minimum Descent Height (MDH) associated with this landing minimum.
|
Mora |
Grid Minimum Off-route Altitudes (MORA) provides terrain and obstruction clearance within the section defined by the enclosing record.
|
NavaidLimitation |
This class represents the information in the 424 navaid limitation continuation record.
|
NdbNavaidClass |
Java class for NdbNavaidClass complex type.
|
Numeric |
This Class represents the "Numeric" character type of the Arinc 424 data.
|
ObjectFactory |
This object contains factory methods for each
Java content interface and Java element interface
generated in the com.ars.aerodata.A424_datatypes package.
|
PointReference |
This element provides a way to reference any A424Point.
|
PreferredRouteDetails |
This class is an abstraction used to represent the details Preferred Route Identifier and Preferred Route Use Indicator.
|
PreferredRouteUseIndicator |
The “Preferred Route Use Indicator” provides information on whether the route in question is point-to-point and therefore usable for navigation, or area-to-area and usable only as advisory information which requires further processing.
|
ProcedureDesignAircraftCategories |
This type provides the aircraft category(s) for which the procedure or portion of a procedure (transition) was designed.
|
ProcedureDesignAircraftTypes |
This type provides the aircraft type(s) for which the procedure or portion of a procedure (transition) was designed.
|
ProcedureWaypointDescription |
This class represents the waypoint description information used by procedure legs.
|
RadioAltimeterHeight |
The height above the ground using the airplane’s Radio Altimeter (aka Radar Altimeter) equipment with a resolution of one Foot (FT).
|
RestrictionAltitudeBlockIndicator |
This class is an abstraction for Restriction Altitude and Block Indicator elements as they occur together in airways restriction records.
|
RnpLos |
Java class for RnpLos complex type.
|
RouteQualifications |
This element provides boolean expressions describing qualifications of the route.
|
RunwayIdentifier |
The “Runway Identifier” field identifies the runways described in runway records and runways served by the ILS/MLS described in ILS/MLS records.
|
Sector |
This class represents the details for a MSA or TAA Sector.
|
SectorDetails |
This class is an abstraction used to represent the details for a Sector.
|
Sectorization |
The “Sectorization” field is used to define the airspace sector a communication frequency is applicable for when an airport defines sectors by bearing from the same point.
|
SegmentDetails |
This type represents the details for a segment.
|
ServiceIndicator |
The “Service Indicator” field is used to further define the use of the frequency for the specified Communication Type.
|
SpecialActivityAreaOperatingTimes |
The Special Activity Area Operating Times field contains the annual expected operation schedule of the Special Activity.
|
SpeedLimit |
The Speed Limit field defines a speed, expressed in Knots, Indicated (K.I.A.S.), for a fix in a terminal procedure or for an airport or heliport terminal environment.
|
StartOrEndTime |
Java class for StartOrEndTime complex type.
|
StationDeclination |
For VHF NAVAIDS, the “Station Declination” field contains the angular difference between true north and the zero degree radial of the NAVAID at the time the NAVAID was last site checked.
|
SupplementalData |
Java class for SupplementalData complex type.
|
TaaSectorDetails |
This class represents the details for a TAA Sector.
|
TimeOfOperationInterval |
The “Time of Operation” field is used to indicate the times of operation of a Facility or Restriction (See ARINC 424 5.195).
|
TimesOfOperation |
Used on airspace, flight planning, communications, and preferred route records to specify the times of operations of those entities.
|
TimeZone |
The standard time zone system is based on the division of world into 24 zones, each of 15 degrees longitude.
|
UpperAltitudeConstraint |
This element provides information on the upper altitude of the airway leg.
|
UtcOffset |
This type specifies the time zone for a port, and whether the port observes daylight time.
|
VhfNavaidClass |
The “Navaid Class” field provides information in coded format on the type of navaid, the coverage of the navaid, information carried on the navaid signal and collocation of navaids in both an electronic and aeronautical sense.
|
WaypointType |
The “Waypoint Type” field identifies a number of data conditions (see 424 5.42).
|
WaypointUsage |
The waypoint usage field is employed to indicate the structure in which the waypoint is utilized.
|
Copyright © 2020. All rights reserved.